Victory Technology International Ltd.  

Product Name: High Efficiency Hydraulic Solder Billet Molding Machine Model NO.: VT-85A Type: Hydraulic Solder Billet Molding Machine Certification: CE Automatic Grade: Automatic Condition: New Customized: Customized Control Type: PLC Trademark: Victory Transport Package: Polywood Box Specification: 3800*1200*1650mm Origin: Made in China Product Description 1. Application: Apply to with lead and lead-free solder billet casting. Our technology can even cast purelead billets, it need co-work with furnace .2.Parameter: Item VT-85AHydraulic system1/setHydraulic pump power2.2kwSolder pump power2.2kwVoltage(V)3×380(-5%+10%)Frequency(Hz)50 (±2%)Warm box power9kwCutting device3kwBillet dimension Φ84*180mm(changeable)Single billet weightAppro 7kgMachine dimension (mm)3800*1200*1650mmMachine weight4500kgCapacity 4-5T/day 3.Equipment : 1)Insulation can for keeping the melted solder in a suitable temperature.2)Solder billet casting mould. Made with special material for cooling the solder 3)Solder billet drawing system, highly automatic4)Solder billet cutting system5)Temperature control system6) Hydraulic system adopt China brand Huade7) Billeting putting hopper 8) Electrical components adopt Schneider Brand4. FeatureVT-85A is a new product designed by our company independently, mainly used for the lead and lead-free solder and tin alloy billet production, provide the corresponding materials for extrusion press processing This machine is made up of machine frame, warm-box formed device, traction device, cutting device, cooling system, hydraulic system and electrical control system.After smelting, open the tin solder material valve , liquid tin go through the guide tube into the attemperator of billet casting machine, will do further temperature adjustment , to get the best casting temperature. After that ,open the tin valve of attemperator, liquid tin will be filled with formed shell , after fully cooling molding by traction device to pull the billet out and when drawing reach to the enough provisions length , cutting unit and saw blades, to carry on cut off the billet , the cut billet will go to the shelf, the whole process is automatically controlled.The machine with advanced control system, using PLC control, accurate monitoring production status of the machine, all the process parameters can be displayed on the color touch screen and modify.Depending on the solder material composition, can set up the corresponding drawing time, Which can ensure the reliability of the traction, lack of material and full automatic alarm, ensure the safety of the equipment and personnel.According to user's extrusion machine using the length of the billet , you can set the corresponding cutting length, to adapt the demand of the downstream process. Cooling system to provide water, water temperature is not more than 30 °C5.Advantage: 1) High efficiency. 45s/pcs, can serve two extruders at one time2) All procedure operate in vacuum condition which have good anti-oxidation effect for the finished billet, Make sure the quality for later solder wire rolling and drawing. 3) Scientific design insulation can make sure the precise control of temperature of the solder, very important for the quality of the solder billet. 4) Cutting surface smooth enough to avoid air bubble during extruding so as to ensure extruding quality.